EN
20
EN
Operation
In
more
detail...
NMHT18-Li
Trimming
6. First cutting both sides from the bottom upwards to the top. This will prevent
any of the cuttings falling into the path of the area still to be cut (Fig. 7).
7. After cutting the sides proceed to the top. Try to keep the cutting device
angled at approximately 15° to the cutting surface (Fig. 8).
Fig. 7
0-1
5˚
Fig. 8
8. When cutting wide hedges with the cutting area in sight move the cutting
blade lightly through the cutting surface in a sweeping motion following the
shape of the hedge or shrub. A slight tilt downwards of the cutting blade in the
direction of motion is recommended for optimum cutting performance.
9. Cut in a number of stages to achieve a better result rather than trying to cut
allow for easy composting.
NOTE:
When shaping it is advisable to achieve a trapezoidal shape
(Fig. 10). A trapezoidal cut corresponds to the natural growth of
plants and results in optimal hedge growth, as it will expose more
light to the lower end of the hedge.
Fig. 9
Fig. 10
MNL_NMHT18-Li_18V 50cm Hedge Trimmer_V1_210913.indd 20
9/13/21 1:10 PM
