EN
22
EN
Care and maintenance
In
more
detail...
NMHT18-Li
General Cleaning
1. Clean the product with a damp cloth and pH-neutral soap. Use a brush for
areas that are hard to reach.
2. In particular clean the air vents (5) after every use with a cloth and brush.
3. Remove stubborn dust with high pressure air (max. 3 bar).
NOTE:
Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they might be
harmful to its surfaces.
4. Check for any damage and wear. Repair damages in accordance with this
instruction manual or take it to an authorised service centre before using the
product again.
Cutting device (blade)
WARNING!
Wear safety gloves when working on the cutting device
1. Keep the cutting device (blade) (1) clean and free of debris. Remove trimmings
with a brush.
2. Apply a small amount of suitable lubricant on the cutting device (blade) to
retain a good cutting performance (Fig. 11).
Repair
This product does not contain any parts that can be repaired by the consumer.
checked and repaired.
Storage
1. Switch the product off and remove the battery pack.
2. Clean the product as described above.
3. Attach the blade cover (11) onto the cutting device (blade) (1).
4. Store the product and its accessories in a dark, dry, frost-free, well-ventilated
place.
MNL_NMHT18-Li_18V 50cm Hedge Trimmer_V1_210913.indd 22
9/13/21 1:10 PM
