Kingfisher 5059340255828 Manual Download Page 3

Page: 3 / 65

FPCSP41-3

Getting

started...

Technical and legal information

Safety warnings

Petrol powered chain saw safety warnings

IMPORTANT Read carefully before use.

Keep for future reference.

WARNING!

Your safety and the safety of others

is very important. Of course, it is not practical

or possible to warn you about all the hazards

associated with operating or maintaining this

product. At all times you must use your own good

judgment.

1. This product is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the product by a

person responsible for their safety;

2. Children should be supervised to ensure that they do

not play with the product.

General warning

1. This product is dangerous if used carelessly or

incorrectly and can cause serious or even fatal injuries.

2. Read all instructions carefully. When using petrol

powered products, always follow stated safety

precautions to reduce the risk of serious personal

injury and/or damage to the product.

3. The product should only be operated by those who

have read and understood all safety and operating

instructions in this manual.

MNL_Petrol Chainsaw_FPCSP41-3_GB_V02_220301.indd 3

3/2/22 11:35 AM

Summary of Contents for 5059340255828


































































Search results

Summary of Contents for 5059340255828

Reviews:

Kingfisher 5059340255828, Manual, Page: 3 / 65

Search results

Summary of Contents for 5059340255828

Reviews: