Kingfisher 5059340255828 Manual Download Page 21

Page: 21 / 65

FPCSP41-3

Getting

started...

Before you start

Unpacking

1. Unpack all parts and lay them on a flat, stable surface.

2. Remove all packing materials and shipping devices, if applicable.

3. Make sure the delivery contents are complete and free of any damage. If

you find that parts are missing or show damage do not use the product but

contact your dealer. Using an incomplete or damaged product represents a

hazard to people and property.

4. Ensure that you have all the accessories and tools needed for assembly and

operation. This also includes suitable personal protective equipment.

WARNING!

The product and the packaging are not children’s toys!

Children must not play with plastic bags, sheets and small parts! There

is a danger of choking and suffocation!

You will need

(items not supplied)

Petrol

Engine oil

Fuel funnel with filter

Saw chain oil

Grease for sprocket wheel

Nose lubrication

Chain file

(items supplied)

Guide bar cover (29)

Fuel mixing bottle (30)

Multi-tool (31)

Screwdriver (32)

Assembly

WARNING!

The product must be fully assembled before operation!

Do not use a product that is only partly assembled or assembled with

damaged parts!

Follow the assembly instructions step-by-step and use the pictures

provided as a visual guide to easily assemble the product!

Disconnect the spark plug connector (7) from the spark plug (7a)!

Reconnect it after assembly.

NOTE:

Take care of small parts that are removed during assembly or

when making adjustments. Keep them secure to avoid loss.

MNL_Petrol Chainsaw_FPCSP41-3_GB_V02_220301.indd 21

3/2/22 11:35 AM

Summary of Contents for 5059340255828


































































Search results

Summary of Contents for 5059340255828

Reviews:

Kingfisher 5059340255828, Manual, Page: 21 / 65

Search results

Summary of Contents for 5059340255828

Reviews: