manualshive.com logo in svg

Kingfisher 5059340255828, Manual, Page: 17 / 65

Share
Download
Kingfisher 5059340255828 Manual Download Page 17

EN

FPCSP41-3

Getting 

started...

Technical and legal information

17

This product produces noxious exhaust fumes. If the product is 

used improperly, these fumes can lead to poisoning, a loss of 

consciousness or death!

Noxious exhaust fumes; do not operate or start the product in 

indoor rooms!
Stop the engine and disconnect the spark plug connector before 

assembly, cleaning, adjustments, maintenance, storage and 

transportation.

 

Choke – CLOSE position

 

Choke – OPEN position

H

 - Set the max. engine speed 

L

 - Set the min. engine speed

Engine start by pulling recoil starter.

Correct direction of cutting-teeth

Chain brake disengaged/ engaged; location: on right side cover. 

Refill chain oil here; location: Chain oil tank cap.

MIN

MAX

MAX

MIN

Indication of chain oil adjuster screw; location: bottom.

Kickback!

 Tip contact may cause the guide bar to move suddenly 

upward and backwards what may cause serious injury to user.
Contact of the guide bar tip with any object should be avoided.

 

Always use the product with two hands. Do not use one hand when 

operating the product.
Objects thrown by the product could hit the user or other bystanders. 

Always ensure that other people and pets remain at a safe distance 

from the product when it is in operation. In general, children must 

not come near the area where the product is.

MNL_Petrol Chainsaw_FPCSP41-3_GB_V02_220301.indd   17

3/2/22   11:35 AM

Summary of Contents for 5059340255828


































































Reviews:

No comments