Kingfisher 5059340255828 Manual Download Page 14

Page: 14 / 65

FPCSP41-3

Getting

started...

Technical and legal information

Safety warnings

The European Physical Agents (Vibration) Directive

has been brought in to help reduce hand arm vibration

syndrome injuries to users of product’s with vibration

emission. The directive requires manufacturers and

suppliers to provide indicative vibration test results to

enable users to make informed decisions as to the period

of time a product can be used safely on a daily basis

and the choice of tool. Further advice can be found at

www.hse.gov.uk.

Emergency

Familiarise yourself with the use of this product by

means of this instruction manual. Memorise the

safety directions and follow them to the letter. This

will help to prevent risks and hazards.

Always be alert when using this product, so that

you can recognize and handle risks early.

Fast

intervention can prevent serious injury and damage to

property.

Stop the engine and disconnect the spark plug

connector if there are malfunctions.

Have the

product checked by a qualified professional and

repaired, if necessary, before you operate it again.

In case of fire stop the engine and disconnect

the spark plug connector.

Take fire-extinguishing

measures immediately if the product switch is no

longer accessible.

WARNING!

Never use water to extinguish a

product on fire. Burning fuel must be extinguished

with special extinguishing agents! We recommend

that you keep a suitable fire extinguisher within

reach in your work area!

MNL_Petrol Chainsaw_FPCSP41-3_GB_V02_220301.indd 14

3/2/22 11:35 AM

Summary of Contents for 5059340255828


































































Search results

Summary of Contents for 5059340255828

Reviews:

Kingfisher 5059340255828, Manual, Page: 14 / 65

Search results

Summary of Contents for 5059340255828

Reviews: