6
convenience.
23. Emergency Rise Button:
Upon pushing this button at any time, the ultrasonic transmission stops and the
vibrating cylinder returns to its original position immediately.
24. Power
Switch:
Upon turning on this switch, the machine will be energized, indicators will light up,
and fans will run.
25. Amplitude
Gauge:
It indicates the resonance level of the welding head when no load is exerted
(depending on the welding head and output level, the resonance is usually between
2.0~2.5) and indicates the level of the input power when the load is exerted
(depending on the work).
26. Overload
Indicator:
It lights up and the operation stops when the ultrasonic oscillator of the machine
operates abnormally.
27. Power
Indicator:
Indicate whether power is on or off.
28. Amplitude
Adjusting
Button:
Select the appropriate output amplitude for the welding head to meet the
requirements of the work-piece.
29. Electrical
Box:
Accommodate the air pressure, electrical control, and oscillating parts.
30. Earth Wire Socket: Refer to the “Correct Grounding Method” section.
Grounding is required to prevent leakage of current caused by electrostatic charge.
Correct grounding of the equipment and system is the prerequisite to ensure normal
operation of the production equipment. Always carry out the grounding in
accordance with (3).