3
I. Specifications
Model Frequency
Power Welding
Capability
Compressed
Air
Dimension Power
Source Weight
KWL-3215 15KHz 3200W
ψ
220m/m
9KG/cm
2
750*990*2060 220V/15A3P 300KG
KWL-4215 15KHz 4200W
ψ
250m/m
9KG/cm
2
750*990*2060 220V/20A3P 300KG
II. Component Description
(1) Component Position
(A) Position of Body Components
1. Triplet
Set
2. Fixed
Handle
3. Rise Buffer Adjusting
Screw
4. Drop Buffer Adjusting
Screw
5. Vibrating
Cylinder
6. Stopper
Screw
7. Spacer
8. Welding
Head
9. Large
Column
10. Base Plate
11. Pressure Gauge
12. Pressure Governor
13. Delay-on Timer
14. Welding Timer
15. Curing timer
16. Selector Switch
17. Counter
18. Rise Governor
19. Drop Governor
20. Hand Wheel For Height
Adjustment
21. Fixed Screw
22. Operator Push Buttons 23. Emergency Rise Button 32. Iron Male Connector
(B) Position of Electric Components
24. Power Switch
25. Amplitude Gauge
26. Overload Indicator
27. Power Indicator
28. Amplitude
Adjusting
Button
29. Electrical Box
30. Earth Wire Socket
31. Power Cord
(2) Name and Function of Body Components:
1. Triplet
Set:
A 5/16” air pressure hose is connected to a dry and clean air source to provide the
machine with compressed air.
Note:
When the inside of the hose is half full of water, rotate the button
anti-clockwise on the bottom of the cup to drain the water. The operation and life of
the air pressure parts will be adversely affected by bad compressed air. For example,
the governor may produce noise, or the solenoid valve may be blocked and therefore
can’t work…etc.
2. Fixed
handle:
Secure the body onto the large column.
3.
Rise Buffer Adjusting Screw:
Adjust the rise buffer rate of the welding head (at the point 14mm from the end of
the rise stroke). Rotate it clockwise to increase the buffer rate or rotate it
anti-clockwise to decrease the buffer rate.