GSM SMS Alarm & Dialer
GSM SOS Call System!
G S M A l a r m S y s t e m .
9
to the user can change it to Stay or Disarm the K2.
=1, stands for outer zones , in Armed or Stay mode, when triggered will cause alarm.
=2, stands for inner zones, in Stay mode if triggered will not cause alarm; in Armed mode, if triggered will
cause alarm.
=3, stands for spot alarm zone, in Stay mode if triggered only cause the siren to sound. Neither dial out nor
send SMS out; in Armed mode if triggered will cause alarm.
=4, stands for 24hours emergency zone with sounds. In any mode if triggered will cause alarm
immediately with siren sounds.
=5, stands for 24hours emergency silent zone. In any mode if triggered will cause alarm immediately, the
siren will not sound.
=6, stands for Armed Button, trigged it to make the K2 change to Arm Mode.
=7, stands for Stay Button, triggered it to make the K2 change to Stay Mode.
=8, stands for Disarm Button, triggered it to make the K2 change to Disarm mode.
=9, stands for door bell button, triggered it to cause the buzzer to sound 8times.
Tips:
1) When the attribute code setup as 6,7,8,9, the siren will not sound.
2) More than one zone attribute can be setup in one SMS Command
but don’t exceed the SMS character
limitation , e.g.: if want to setup the attributes of wired zone, 01 wireless zone, 02wireless zone, 03
wireless zones, 08 wireless zone, the password is 1234, then please send
1234D00#0#D01#1#D02#4#D03#6#D08#9#
6.8 Inquiry the Zone Attribute
If send successful, will return the zone attributes:
00-1;01-0;02-2;……;16-7
.
6.9 Setup the Siren Sound time(Default is 180seconds)
If setup successful, will return
Siren ON + xxx + Seconds
E
is the identification character of this command.
Xxx=000~999, unit is second, 3 digits. Default is 180 seconds.
E,g,: if you want to setup the siren sound 60seonds when alarm occurrence, and password is 1234, then
please send
1234E060#
Tips:
Only the zone attribute code setup as 0,1,2,3,4 will cause the siren sound while alarm occurrence. And the siren will
sound about 20 seconds then interrupt about 2 seconds,
6.10 Setup the Alarm Delay Time(Default is 000second)
If setup successful, will return
Alarm Delay + xxx + Seconds
F
is the identification character of this command.
Xxx=000~999, unit is second, 3digits. Default is 000 second.
Tips:
Only the zone attribute code setup as 1,2,3 will delay to cause alarm while alarm occurrence.
pwd+E+xxx+#
#
pwd+D+#
pwd+F+xxx+#
#
