GSM SMS Alarm & Dialer
GSM SOS Call System!
G S M A l a r m S y s t e m .
5
5. Installation and Connection Diagram
5.1 Inserting the SIMCard
Important:
Make sure to switch off K2 Panel before inserting or removing your SIM card.
1)
At the backside of the panel, please remove the cover, and Slide the SIM card holder in the
direction of
―OPEN‖ , and insert the SIMCard. See below photos.
2)
Close the SIM card holder and then slide it in the opposite direction of
―OPEN‖ to lock it. See
above photo.
5.2 Contacting the Siren, hooter
The user can connect one 9~12V rated siren, or hooter to the K2 Panel
’s siren output, once alarm
occurrence, this output ports will start the siren or hooter to make sounds. The positive of the siren
connect to the Siren+ port, and the negative of the siren contact to the Siren
– port. Generally, the siren
wire marked red color and black color, the red color is positive and the black color wire is negative.
See below:
5.3 Contacting the AC/DC Power Supply
Please contact the +12VDC to the K2 Panel, the Positive of the +12VDC connect to the PWR+, the
negative of the 12VDC please contact to PWR - . Generally, the red color from the AC/DC Adaptor is
Positive, and the black color is negative. The AC/DC Adaptor is 12V1A or 12V2A. see above-mentioned.
