background image

 
 
 
 
 

 

 

   

GSM SMS Alarm & Dialer 

    GSM  SOS  Call  System! 

G S M   A l a r m   S y s t e m .

 

  16 

numbers one by one, if picked up the call, the K2 will stop to sound and enter to listen mode, can not speak. If 

nobody picked up or rejected, the K2 will dial all of the authorized numbers 3 times in cycle then stop to dial 

any more. Meanwhile, the K2 will enter to previous status. 

2)  Only the zone attribute code setup as 0,1,2,3,4 will cause the siren sound while alarm occurrence. And the 

siren will sound about 20 seconds then interrupt about 2 seconds, the time according to the setting. 

3)  Once any zone triggered, the corresponding LED will always on till Disarm or Restart the K2.   

8.1 Operation by Remote Controls 

 

Press the button ― ‖ on the remote key or Press the wireless or wired Arm button, the K2 enters arm 
status (delay time according to the setting), Under this status, any detector triggered, the K2 will alarm, 

if answered the call, the siren will stop and can listen in the alarm area by phone. 

Tips:

 

If you use the remote control to arm the K2, you press the Arm Button, then press the SOS button within 2 

Seconds, the K2 will enter Armed mode immediately, no delay.

 

 
Press the button ―

‖ on the remote control, or press the wireless or wired Disarm button, or access 

control and RFID Card Reader with authorized access signal, the K2 disarms immediately.    Under 

this status, any detector triggered, the K2 will not alarm. Except the zone attribute is the 24-Hour 

Emergency Zones. 

 

Press the button ―

‖ on the remote control or the wireless or wired Stay button, the K2 enters 

Stay(Partial Armed) status, the zones attribute had been set as outer zone and 24 hours emergency 

zone triggered will cause alarm, but the zone attribute had been set as inner zone triggered will not 

cause alarm. 

 

Press Emergency button (SOS) 

!

‖ on the 

remote control

. The K2 will cause emergency alarm. The 

siren will not sound, but will alert the pre-set phone number immediately. The Alarm SMS Content is 

Remote Key SOS Help! 

Tips:

 

The Alarm SMS Content for the remote control SOS button can not be modified.

 

8.2 Armed or Stay WITH a FREE call from authorized phone! 

The K2 supports armed or Stay by a free call from authorized phone, after you setup the authorized 

number Function 2 Code as 1, then the user can use this phone number to Arm or Stay the K2 by free 

charge call in. Please reference 

6.2 Setup Authorized Number

 to setup it. 

When the K2 in 

Disarmed

 mode, any number with the authorized right call in will change it to Stay 

mode; 

When the K2 in

 Stay

 Mode, any number with the authorized right call in will change it to Armed(Away) 

mode, and return SMS confirmation 

Armed

When the K2 in 

Armed(Away)

 Mode, any number with the authorized right call in will change it to Stay 

Summary of Contents for K2





















Reviews: