Vehicle Starting and Driving
S-26
Engine shut down
Loosen accelerator pedal.
Place the gear box lever in neutral position and apply the parking brake.
Turn the ignition key to the off position, without accelerating.
Note:
After engine
runs at heavy loading, temperature of cooling water is higher than 90ºC, so do not stop
engine at once. The stalling should be made only after the engine has been running for a period of time and the
water temperature lowed to the normal range. The parking brake is achieved by setting the hand brake handle
on the control position after the stalling. The shift should be switched to the neutral position and power supply
shut down. Please make necessary inspection of engine and then troubleshoot.
Cautions
Cautions during the winter operation
①
Please add long life coolant to cooling system.
②
After parking, please exhaust water in air tank in time.
③
Before winter comes, please check level of battery electrolyte, specific gravity and voltage.
Water used in the radiator must be soften.
Never make engine start without preheating or run with trouble. In the cold climate, do not start engine until
preheat it with hot water or vapor to more than 30-40ºC.
During driving downhill, do not place gearshift lever in neutral position to slip. Please apply exhaust brake or
retarder.
Do not start vehicle until parking brake has been released
Summary of Contents for XMQ6129Y series
