ADJUSTING THE GIBS
1.
After the machine has been operating for a long period, the gibs may become loose.
At this time, you need to adjust the gibs.
2.
Loosen the three infeed table lock nuts (A) and the two outfeed table lock nuts (B).
3.
Adjust the three gib screws (C) on the infeed table and the two gib adjust screws (D)
on the outfeed table until smooth infeed table traverse is found.
4.
Properly tighten all lock nuts, tightening the upper ones first and then the lower ones.
INFEED TABLE LOCK NUT (A).
INFEED TABLE GIB ADJUSTMENT
SCREW (C).
OUTFEED TABLE LOCK NUT (B).
OUTFEED TABLE GIB ADJUSTMENT
SCREW (D).