STARTING AND STOPPING
THE JOINTER
1.
The machine switch is located at the right
side of the machine.
2.
Press the ‘ON’ switch to start the machine.
3.
Press the ‘OFF’ switch to stop the machine.
DEPTH OF CUT
ADJUSTMENT
1.
To set the depth of cut, move the infeed table
up and down.
2.
The table can be moved by turning the
depth adjustment handwheel (A) under
the table.
3.
Loosen the outfeed table position fix lever
before turning the depth adjustment
handwheel (A). Tighten the infeed table
position lock fix lever (B) after the infeed
table is adjusted.
4.
The depth of cut adjustment can be read
on the depth scale (C), located at the
front of the infeed table.
DEPTH SCALE (C)
DEPTH ADJUSTMENT HANDWHEEL (A)
FIX LEVER (B)
