Page 16
1. Use the Faceplate as a guide to mark and cut out the mounting cavity, and if necessary,
mark and drill the mounting holes
(Fig. 14)
.
2. Mount Faceplate in wall with supplied screws.
The Faceplate is optional and can be removed as follows:
(Fig. 15)
1. Remove 4 screws from Controller.
2. Slide Faceplate off Controller.
3. Replace 4 screws.
Fig. 14
Fig. 15
Note:
Depending on the mounting
surface, pilot holes for the
screws may or may not need to
be drilled.
Note: If not using the Faceplate, see Faceplate removal instructions below.
WALL MOUNT FACEPLATE
Summary of Contents for 9762-LP
