57
Appendix
PLC-EN.indd 57
2009-11-17 10:03:48
Operation procedures:
1. Turn on the projector
2. Obtain network address. DHCP set is displayed as on and obtain network
address automatically. If familiar with network, you can set DHCP as close
and obtain network address manually.
3. Enter network settings menu.
(1) Press F.MENU button of the
remote or press MENU button of
the projector first and then
SELECT. TheFULL MENU will
display. Use arrow button
▲▼ to select network icon.
(figure 1)
(2) Press SELECT or ► to enter
network menu.(figure 2)
(3)
Use arrow button
▲▼
to
select network settings and
the press SELECT.
(figure 3)
(figure 1)
(figure 2)
(figure 3)
Network setting
Network information
Exit
Move
MENU
SELECT
Next
Next
Network information
Exit
Move
MENU
SELECT
Next
Network setting
Back
LAN
DHCP
ON
IP Address
Subnet
Gateway
DNS
set
cancel
Network Setting
.
.
.
.
.
.
.
.
.
.
.
.
Network
Network
(4) Press SELECT, choose ON by
▲▼ (figure 4)and Press SELECT
again.
(figure 4)
(figure 3)
LAN
DHCP
ON
IP Address
Subnet
Gateway
DNS
set
cancel
Network Setting
.
.
.
.
.
.
.
.
.
.
.
.
(figure 3)
