VGA �y�tem Menu
Computer �y�tem �election
mputer �y�tem �election
This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC
Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format
and tunes to project a proper image without any additional settings.
One of the following messages may appear when:
The projector cannot recognize the connected
signal conforming to the provided PC Systems.
Auto
is displayed on the System Menu box and
the Auto PC Adjustment function works to display
proper images. If the image is not projected
properly, a manual adjustment is required.
There is no signal input from the computer.
Check the connection between your computer
and the projector.(See “Troubleshooting” on
page 64.)
Auto
-----
1
2
System can also be selected manually.
�electing Computer �y�tem Manually
Press the F.MENU button to display the On-Screen
Menu. Use the Point
▲▼
buttons to select Input and
then Press Point
►�
or the SELECT button.
Use the Point
▲▼
buttons to select "System" and then
Press Point
►�
or the SELECT button.
Use the Point ▲▼ buttons to select the desired
▲▼ buttons to select the desired
buttons to select the desired
system and then press the SELECT button.
3
The PC System Menu
Selected system is displayed.
Computer Input
mputer Input
Computer Input
mputer Input
PLC-EN.indd
00-11-1 10:0:0
