1
In�tallation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100~240V
AC and it automatically selects the correct input
voltage. It is designed to work with single-phase power
systems having a grounded neutral conductor.
To reduce the risk of electrical shock, do not plug into
any other type of power system.
If you are not sure of the type of power being supplied,
consult your authorized dealer or service station.
Connect the projector with all peripheral equipment
before turning the projector on. (pp. 14-16)
Note:
Unplug the AC power cord when the projector is not in use
for security reasons. When this projector is connected to an
outlet with the AC power cord, it is in Stand-by mode and
consumes a little electric power.
CAUTION
The AC outlet must be near this equipment and must be easily
accessible.
NOTE:
● Inproper cable may influence product performance or even lead to eletric shock, fire and other accidents. Please use
original model cables as supplied for safety and best performance of product.
● Frequent cable types: AC power cable, various VGA cable, Audio cable, AV cable, RS232 cable etc.
NOTE ON THE POWER CORD
AC power cord must meet requirement of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.
To the AC outlet.
(100 - 240 V AC)
Ground
AC outlet �ide
Projector �ide
To power cord connector
on your projector.
Connect the AC power cord (supplied) to the
projector.
Ba�ic Operation
PLC-EN.indd 1
00-11-1 10:00:
