Computer Input
mputer Input
Auto
PC Adju�tment
function is provided to automatically adjust Fine sync., Total dots, Horizontal, Vertical,
Clamp, Display area H and Display area V positions to conform to your computer.
PC Adju�t Menu
Auto PC Adju�tment
To �tore adju�tment parameter�
The adjusted parameters from the Auto
PC Adju�tment
can
be stored in the projector.
NOTE:
• Fine sync., Total dots, Horizontal and Vertical position of
some computers cannot be fully adjusted with the Auto
PC Adjustment function. When the image is not provided
properly with this operation, manual adjustments are
required.
• The Auto PC Adjustment cannot be operated when 480i,
575i, 480p, 575p, 720p,1035i, or 1080i is selected in the
PC System Menu.
Auto PC Adju�tment
Menu Operation
Computer Input
mputer Input
1
2
Press the F.MENU button on the Remote Control
to display the On-Screen Menu. Use the Point
▲▼
buttons to select Input and then Press Point
►�
or the
SELECT button.
Press Point
▲▼
buttons to select “Auto PC Adj” and
then press SELECT button.
PLC-EN.indd
00-11-1 10:0:1
