24
Command
String
Example
HDBT -
Baud Rate Setup Command
>BRxRa<CR>
x= 1-8, for more than one port
use a comma to separate.
a= 9600/19200/38400/115200
baud rate
send: >BR1R9600<CR>
response: <BR1R9600<CR>
Set HDBT port 1, baud rate to
9600.
Is used to modify Baudrate of
HDBT card.
Audio
internal or external
>AExI/E<CR>
x= 1-8, for more than one port use
a comma to separate.
I = Internal Audio
E= External Audio
send: >AE2I<CR>
response: <AE2I<CR>
Set port 2, internal audio
HDMI/DVI output
>OMxH/D<CR>
x= 1-8, for more than one port use
a comma to separate.
H= HDMI
D= DVI
send: >OM8H<CR>
response: <OM8H<CR>
Set output 8, output HDMI
CVBS
input or output set
>CVBRxP/N<CR>
x= 1-8,CVBS input
P= 1280x720p60
N= 1920x1080p60
x= 1-8,CVBS out
P= PAL
N= NTSC
send: >CVBR3P<CR>
response: <CVBR3P<CR>
Set input 3, output 1280x720p60
Set outputt 3, output PAL
Port HDCP
Authorized Command
>HDCPA/Wx<CR>
A - Authorized
W - Unauthorized
x= 1-8, for more than one port use
a comma to separate.
send: >HDCPA1<CR>
response: <HDCPA1<CR>
Set port 1 HDCP authorized.
Set System
RS232 Baud Rate
Setup Input Command
>RSab<CR>
a= 9600/19200/38400/115200
baud rate
b= 8N1/8E1/8O1, bits, parity, stop
send: >RS96008N1<CR>
response: <RS96008N1<CR>
Set System RS232 baud rate to
9600, 8 bits no parity and 1 stop.
Query System
RS232 Baud Rate, Data Bits,
Parity and Stop Bit Command
#RS<CR>
send: #RS<CR>
response: <RS96008N1<CR>
Set System IP Command
>IP:x<CR>
x= IP address
send: >IP:192.168.2.245<CR>
response: <IP:192.168.2.245<CR>
Query System IP Command
#IP<CR>
send: #IP<CR>
response: <IP:192.168.2.245<CR>
Set System Mask Command
>Mask:x
x= mask
send: >Mask:255.255.255.0<CR>
response:
<Mask:255.255.255.0<CR>
