26
Command
String
Example
Request STATUS
of one OUT-card x
#OUTx?<CR>
x=1-8
send: <INx:y<CR>
x=1-6
y=0 : no signal, y=1: signal
detected, y=2: signal input and
output
Example received data:
<OUT6:2<CR>
Request RESOLUTION
of all IN-cards:
#RESIN?<CR>
send: <INx:y,….<CR> x=1-6
y for 800x600p@60Hz to
3840x2160p@30Hz, or N/A
Example Received data:
<IN2:1920x1200p@60Hz,IN3:N/A,
IN4:1280x720p@60Hz
Request RESOLUTION
of all OUT-cards:
#RESOUT?<CR>
send: <OUTx:y,….<CR> x=1-8
y for 800x600p@60Hz
to 3840x2160p@30Hz, or N/A
Example received data:
<OUT6:N/A,OUT7:1920x1200p@6
0Hz,OUT8:1280x720p@60Hz
Request RESOLUTION
of one “Resolution Set” (Scaler)
OUT-card
#RSSOUTx?<CR>
send: <RSSx:y,….<CR> x=1-8
for preset resolution
y for 800x600p@60Hz
to 3840x2160p@30Hz
Example received data:
<RSS6:800x600p@30Hz<CR>
Automatic status report at action:
•
Change of signal-resolution IN and OUT
•
Change of signal-status IN and OUT: no signal, signal detected,
signal active
•
Switching input to output
1. Response <INx:y<CR> x=1-6
y=0: no signal, y=1: signal detected, y=2: signal input and output
Example Received Data: <IN2:2<CR>
2. Response <OUTx:y<CR> x=1-8
y=0: no signal, y=1: signal detected, y=2: signal input and output
Example Received Data: <OUT7:0<CR>
3. Response <RESx:y<CR> x=1-8
y = resolution 800x600p@60Hz to 3840x2160p@30Hz, or N/A
Example Received Data: <RES2:1920x1200p@60Hz<CR>
4. Response <RSSx:y<CR> x=1-8RSS for ‘Resolution Set Scaler’
y= resolution 800x600p@60Hz to 3840x2160p@30Hz, or N/A
Example Received Data: <RSS6:1920x1080p@60Hz<CR>
>- Command, #- Query,< Response, <cr>=0x0D Hex/ 13 Decimal.
Die Antworten werden per IP und RS232 ausgegeben.
Responses are output via IP and RS232.
Ein Steuersystem (z. B. Mediensteuerung) kann RS232 Befehle mit anderen HDBT Geräten direkt
über den HDBT-Bus der Matrix durchleiten (pass through).
