2.10
FITTING THE FLUE TERMINAL
a)
The flue terminal locates over the telescopic flue section and is clamped
as per the other flue sections. The flue terminal must not protrude out
of the wall further than 150mm. This is indicated by the ridge on the
terminal itself.
Failure to comply with this request will result in poor
performance of the product during adverse weather conditions.
See fig. 22 below for correct positioning of the flue terminal.
Fig. 22
18
Inner Cavity Wall
Outer Cavity Wall
Correct Position of
Flue Terminal
Flue terminal shown in correct
position with inlet area flush with
external wall
Inner Cavity Wall
Outer Cavity Wall
Flue terminal shown in an incorrect
position, protruding beyond the
external wall
In-Correct Position of
Flue Terminal
Ensure flue
pipes are
sealed to
inner and
outer cavity
and gap
around
terminal are
sealed
