10
DIGITAL AUTO RANGING MULTIMETER
10) Care, Maintenance & Storage
Auto Power Off
If you dont operate the Kincrome K8315 Multimeter for about 15 minutes, it will turn OFF automatically. To turn it on again, just roate
the range switch or press a button.
Note:
If you press the “
” button to turn on the meter, the automatic power-off function will be disabled.
Battery Replacement
If the sign “
” appears on the display, it indicates that the batteries should be replaced. Remove the screws and open the back
case, replace the exhausted battery with new batteries (NEDA 1604, 6F22 or equivalent).
Fuse Replacement
Fuse rarely needs replacement and is often caused as a result of operators error. To replace the fuses, remove the testing leads (10)
from the power source, open the battery cover and replace the damaged one with a new fuse of the specified rating. Reinstall the
battery cover and lock the cover.
11) Spare Parts
Part No
Description
Quantity
K8315-1
Storage Bag
1
K8315-2
Test Leads (10)
1
K8315-3
Multi Function Adaptor (11)
1
K8315-4
Fuse
1
* Please Note:
Kincrome reserve the right to change spare parts at any time without notice.
11) Warranty
Warranty given by Kincrome Australia Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria (Tel 1300 657 528).
The applicable warranty period (12 months) commences on the date that the product is purchased. If this product has materials or
workmanship defects (other than defects caused by abnormal or non warranted use) you can, at your cost, send the product to place
of purchase, an authorised Kincrome service agent or one of Kincromes addresses for repair or replacement. Your rights under this
warranty are in addition to any other rights you have under the Australian Consumer Law or other applicable laws. Our goods come
with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major
failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For further details please visit
www.kincrome.com.au or call us. Due to minor changes in design or manufacture, the product you purchase may sometimes differ
from the one shown on the packaging..
IMPORTANT! If the tool fails to operate correctly, call customer service on 1800 657 528 for advice on the best resolution for your
situation. If a resolution cannot be achieved over the phone please take the tool and all related accessories to an authorised service
centre or place of purchase showing proof of purchase for assistance.
Summary of Contents for K8315
Page 12: ...11 DIGITAL AUTO RANGING MULTIMETER Notes...
Page 13: ...www kincrome com au...
