69
for
Windo
ws and Macint
osh
3.
In the Configure LPT Port window that appears, select an
option. Then click OK.
If the following error message window appears, you must change
your BIOS settings to enable the parallel port to use DMA. Refer
to your computer's reference manual for the instructions.
If the following error message window appears, set the parallel
port configuration to ECP mode in the BIOS settings. Refer to
your computer's reference manual for the instructions.
Configure LPT port
If your computer has additional parallel ports, you can use the following Re-
sources dialog box to select the IRQ and DMA Channel.
Please ensure that there is no conflict in the address assignments. The PC can
support up to three parallel ports as long as there are no conflicts for each port.
Tips for Special Case (for Windows)
Use of One-way Interface
Upon installation of the printer driver, the default is set for the use of bi-directional
interface. This setting may not work out with the use of an added interface port,
or the use in the network setting. To ensure the smooth operation, set up the
printer for the one-way interfacing.