8. Perform measurement of a customized procedure
Customized procedures, created by the Logaz software (optional software), when they are transferred in the analyser can
be performed.
8.1. Preliminary operations to procedures
Before performing the measurements, names of the different customers and theirs respective boilers must be saved in the
analyser. See page 20 to create customers and page 21 to create boilers or the Logaz software user manual (optional
software).
8.2. Launch a customized procedure
➢
Turn on the analyser.
➢
Go to
“Procedures”
with the rotative button then press OK.
➢
Select the customer then the boiler in which measurements will be performed.
➢
Go to
“Customized”
with the rotative button then press OK.
The list of procedures saved in the analyser is displayed.
➢
Select the procedure with the rotative button then press OK.
The analyser displays the 1
st
step of the customized procedure.
➢
Go to
“Start”
with the rotative button then press OK.
The analyser performs the measurement.
➢
Press OK on
“Next”
if the customized procedure has several step.
The analyser launches the next step.
OR
➢
Press OK on
“Quit”
if the customized procedure has only one step.
The analyser backs to the list of customized procedures. At the end of the procedure, the analyser saves it and
automatically links it to the customer and boiler selected before launching the measurement. It is possible to get to details of
this procedure in the
“Customer”
menu.
Perform measurement of a customized procedure
23
netzerotools.com
netzerotools.com
