2. Safety instructions
The following safety instructions have to be strictly observed.
Not respecting these safety instructions can lead to a loss of warranty.
•
The analyser should not to be used in and under water.
•
The analyser should not to be placed near or directly at open fire or heat.
•
The indicated range of temperature of the probe is not to be exceeded, as the probe and temperature sensor could be destroyed.
•
After measurements, before packing the analyser, wait for the probe to be cold. As long as it is hot, the probe could produce
injuries.
•
The exhalations of alcohol liquids (lubricants, petrol, spirit, vanish...) may damage the sensors of the analyser. Therefore, it is
forbidden to preserve or use these fluids nearby the analyser.
•
Load the battery only with Kimo charger. Use another type of charger can damage the battery and the analyser and can cause
electrical shocks.
12
Safety instructions
netzerotools.com
netzerotools.com
