7. Manage the inspections
Each saved inspection is linked to a customer. It is possible to see the details of an inspection, to add one or to delete one.
Available inspections in the analyser are the following : combustion, ambient temperature, flue gas temperature, internal temperature, Flow/Return
temperature, dewpoint temperature, draft pressure, differential pressure, flue gas velocity, CO max, opacity, ambient CO
2
, ionisation current, leak
detection, gas network tightness and gas flow.
The maximum number of inspection is 10 per boilers.
7.1. Get to inspections
To find every inspections of a customer and details of this inspection, follow the specified procedure :
The list of customers saved in the analyser is displayed.
➢
Go to the required customer then press
OK
.
Every boilers linked to this customer are displayed.
➢
Go to the required boiler then press
OK
.
Every inspections linked to this customer and boiler are displayed.
➢
Go to the required inspection then press
OK
.
Details of the inspection are displayed.
7.2. Create an inspection
It is possible to create an inspection for specific customer that will be performed later.
The list of customer's inspections is displayed.
➢
Press the function key
to add an inspection.
A list of inspections is displayed.
➢
Go to the required inspection then press
OK
.
The inspection is added with
“Not done”
mention.
7.3. Delete an inspection
To delete an inspection of a customer.
The list of customer's inspections is displayed.
➢
Press the function key
to delete an inspection.
➢
Go to
YES
then press
OK
to delete the inspection or go to
NO
then press
OK
to cancel.
22
Manage the inspections
netzerotools.com
netzerotools.com
