English
- 26 -
Warning
Please make sure that below 3 parameters are not
configured this way at the same time; otherwise your
display may enter a reset loop on logo screen. In order
to get out of this loop, you should unplug the OPS unit
and change at least one of the 3 parameters.
1.
Display:
Menu > Settings > Signage > Power Up
Settings > Power Up Mode = STANDBY
2.
Display:
Menu > Settings > Signage > Power Up
Settings > Quick Standby = DISABLED
(*)
If the ERP Regulations 2021 are applied (depends
on the model of the unit):
Menu > Settings > Signage
> Power Up Settings > Power Mode = ECO
3. OPS:
BIOS Menu > Chipset > State After G3 >
S0 STATE
Apps
You can access the applications installed on your
Display from
Apps
menu. Highlight an app and press
OK
to launch.
In order to open the
Start url
that is
defined the in
Settings>Signage>Link Options
menu highlight the
Custom App
option and press
OK
.
Notes:
Possible application dependent problems may be caused by
the content service provider.
Third party internet services may change, be discontinued or
restricted at any time.
Using Audio Video Sharing
Network Service (optional)
Audio Video Sharing feature uses a standard that eases
the viewing process of digital electronics and makes
them more convenient to use on a home network.
This standard allows you to view and play photos, music
and videos stored on your media server connected to
your home network.
1. Server Software Installation
The Audio Video Sharing feature cannot be used if the
server programme is not installed onto your PC or if
the required media server software is not installed
onto the companion device. Please prepare your PC
with a proper server programme.
2. Connect to a Wired or Wireless Network
See the
Wired/Wireless Connectivity
chapters for
detailed configuration information.
3. Enable Audio Video Sharing
Enter the
Settings>System>More
menu and
enable the
Audio Video Sharing
option.
4. Play Shared Files via Media Browser
Highlight the
Audio Video Sharing
option in the
Sources
menu by using the directional buttons and
press
OK
. Available media server devices in the
network will be listed. Select one and press
OK
to
continue. The media browser will then be displayed.
Refer to the
Media Browser
Menu
section for further
information on file playback.
If a problem occurs with the network, please switch
your display off at the wall socket and back on again.
Trick mode and jump are not supported with the Audio
Video Sharing feature.
PC/HDD/Media Player or any other devices that are
compatible should be used for higher playback quality.
Note:
There may be some PC’s which may not be able to
utilise the Audio Video Sharing feature due to administrator
and security settings (such as business PC’s).
Internet Browser
To use the internet browser enter the
Apps
menu first.
Then launch the internet browser application which
has an orange coloured logo with earth symbol on it.
(*)
The appearance of the internet browser logo may change
In the initial screen of the browser, the thumbnails of
the predefined (if any) links to web sites available will
be displayed as
Speed Dial
options along with the
Edit Speed Dial
and the
Add to Speed Dial
options.
You can press the
Internet
button on the remote to open
the initial internet browser page. If the
Open browser
initial page
URL in the
Settings>Signage>Link
Options
menu is defined, the browser will open on
this page. Otherwise this button will not be functional.
To navigate the web browser, use the directional
buttons on the remote or a connected mouse. To see
the browser options bar, move the cursor to the top of
the page.
History
,
Tabs
and
Bookmarks
options and
the browser bar which contains previous/next buttons,
the refresh button, the adress/search bar, the
Speed
Dial
and the
Vewd
buttons are available.
To add a desired website to the
Speed Dial
list for
quick access, move the cursor to the top of the page.
The browser bar will appear. Highlight the
Speed Dial
- button and press the
OK
button. Then select
Add
to Speed Dial
option and press the
OK
button. Fill in
the blanks for
Name
and
Address
, highlight
OK
and
press the
OK
button to add. Whilst you are on the site
you wish to add to the
Speed Dial
list, highlight the
Vewd
button and press the
OK
button. Then highlight
Add to Speed Dial
option in the submenu and press
the
OK
button again.
Name
and
Address
will be filled
automatically according to the site you are visiting.
Highlight
OK
and press the
OK
button to add.
You can also use the
Vewd
menu options to manage
the browser. Highlight the
Vewd
button and press
the
OK
button to see available page specific and
general options.
There are various ways to search or visit websites
using the web browser.
