Kimex 163-4335, User Manual

Page: 41 / 70

English - 40 -
ENTERACTIVESTANDBY
Enter active standby
state
no parameter
#*TV will be sent to Active Standby
state!
or
#*TV is in Active Standby state
already!
EXITACTIVESTANDBY Exit active standby state no parameter
#* TV is not in Active Standby
state!
SWOL Set Wake on Lan option
integer n ( n = 1 (enable), n =
0 (disable))
#*Wake on Lan is set to enable.
or
#*Wake on Lan is set to disable.
GWOL Get Wake on Lan option no parameter
#*Wake on Lan is enable.
or
#*Wake on Lan is disable.
SETCUSTOMERNAME
Change or set the
Customer name
string - (customername)
#*Customer name is set as
TOSHIBA (ie. TOSHIBA)
GETCUSTOMER
Get the Customer name no parameter
*Customer:TOSHIBA#* (ie.
TOSHIBA)
screen_capture_usb
Capture specified surface
as bmp to USB stick.
integer n (0 for UI, 8 for video
and OSD)
#*Screen capture is successfull.
or
#*Screen capture failed!
NETWORK COMMANDS
Command Description Parameter Return
set_IP_address
Set static IP address of
eth0 network interface.
str-int n Example: set_IP_
address 192.168.0.15
#*IP address setting Succesfull
or
#*IP address setting NOK
get_IP_address
Get IP address of eth0
network interface. Usage:
get_IP_address
no parameter #*IPaddr: ...
SAVEWIFIPROFILE
Save access point to
wifi_profile.
str-int ssid, bssid key
Profile saved.
or
Number of profiles exceeds the
maximum number to be stored.
Wifi
checks if given SSID
wifi is found or not and
returns Pass or Fail.
Works only in portal
mode
str-int ssid
#*Pass
or
#*FAIL
GETWIFIAPSSID
returns the SSID of
access point
no parameter
#*Current stored Wifi AP SSID is
(<SSID>)
SETWIFIAPSSID
sets the SSID of access
point. SSID must be
maximum 32 characters
string n (example ‘AP-
ac:6d:bb:82:a8:ac’ or
‘486dbb82a89ac’ )
#*Error! SSID can not be changed
when Access Point is active
or
#*Error! SSID parameter is too
long. Should be less than 32
characters
or
#*Wifi AP SSID is already
(<SSID>)
or
#*Setting Wifi AP SSID (<SSID>)
succeeded
GETWIFIAPSECURITY-
TYPE
returns the security type
of access point
no parameter
#*Current stored Wifi AP Security
type is (<TYPE>)