English
- 31 -
GETDAPAVL
Get DAP (Dolby Audio
Processing) AVL state.
no parameter
#*DAP (Dolby Audio Processing
Availability) is inactive
or
#*DAP (Dolby Audio Processing
Availability) Mode is off
or
#*DAP (Dolby Audio Processing)
state is ...
SETDYNAMICBASS
Set dynamic bass state.
integer n (0 = off, 1 = on)
#*set dynamic bass state to n
GETDYNAMICBASS
Get dynamic bass state. no parameter
#*the dynamic bass state is ...
(0 = off, 1= on)
SETBASSGAIN
Set bass gain
integer n (-6 <= n <= 6)
#*set bass gain to n
or
#*Incorrect sound system
parameter entered
GETBASSGAIN
Get bass gain
no parameter
#*the bass gain level is n
Note: Above n is -6 <= n <= 6
SETSURROUNDSOUND
Set surround sound
state.
integer n (0 = off, 1 = on)
#*set surround sound state to n
SETEQUSERFREQ
Set equalizer user freq.
value for any band.
string n (120Hz, 500Hz,
1.5KHz, 5KHz, 10KHz)
integer n -13 < n < 13
Example:
SETEQUSERFREQ 120Hz
10
#*setEQUserFreq() set to n
or
#*Invalid parameter entered
or
#*Incorrect equalizer mode. It
should be USER mode
GETEQUSERFREQ
Get equalizer user freq.
value of specified band
string n (120Hz, 500Hz,
1.5KHz, 5KHz, 10Khz)
#*the equalizer value for the
band is n
or
#*Invalid parameter entered
Note: Above n is -13 < n < 13
GETDIGITALOUT
Get digital out.
no parameter
#*digital out is pcm
or
#*digital out is compressed
SETSOUNDSYSTEM
Set sound system.
string n (M, BG, I, DK, L, LP)
#*setSoundSystem() to n
or
#*Incorrect sound system
parameter entered
SETEQMODE
Set equalizer mode.
string n (Music, Movie,
Speech, Flat, Classic, User)
#*setEQMode() set to n
or
#*Incorrect equalizer parameter
entered
GETEQMODE
Get equalizer mode
no parameter
#*the equalizer mode is n
Note: Above n is one of Music,
Movie, Speech, Flat, Classic,
User
SETDIGITALOUT
Set digital out.
string n (compressed, pcm)
#*setDigitalOut() set to n
or
#*Incorrect digital out mode
parameter entered
HARDOFHEARING
Set hard of hearing state.
integer n (0 = off, 1 = on)
#*set hardofhearing state to n
AUDIODESC
Set audio description
state.
integer n (0 = off, 1 = on)
#*set audio description state to n
VOLUMEUP
Inrease Volume Level by
1 step
(Until max volume)
no parameter
#*volume LEVEL is increased
to ...
or
#*Volume level is at max value.
You can not increase volume
level further. Confirmed max
volume level is ...
