Kimex 049-3W Series, Installation Manual

Page: 19 / 28

4
1. Please use the plastic anchors to mounting
on a solid stone ceiling or concrete. Determine
the position of the brackets assembly
according to the dimensions of the crankcase and
the height of the projection screen surface.
Draw a straight line to install the two brackets in
the same alignment.
Use these as a template and mark the holes in the ceiling with a pencil. Then
drill the holes according to the markings with a 6 mm drill bit and insert the
dowels into the holes. Secure the mounting brackets to the ceiling using the
universal screws.
Screen installation
wall with a pencil. Then drill the holes according to the markings using a 6
mm drill bit and insert the studs into the holes. Secure the mounting
brackets to the wall with the universal screws.
2. Now lift the crankcase with two people and insert it carefully in the
brackets. Make sure that the profiles of the box engage in the hooking arms
of the brackets. Now let the case slide slowly down and only let go when
the c rankcase is actually held by the bracket..
Ceiling mount - Option 1
WARNING ! Be sure to use a supporting structure
.
1. Hold the crankcase in
front of the brackets and
push it from below with
the top edge against the
head of the bracket so
that the end of the
bracket is in the groove in
the crankcase .
2. Slide the crankcase
towards the wall until it is
visibly resting on the
brackets.
3. Once the crankcase is
securely fastened to the
brackets, tighten the
lower security screw
clockwise. The bracket
closes, tightens and the
housing moves up a bit.