1
•
Do not install the display until you have read and understood the entire user
manual.
•
It is strongly recommended that the screen be installed by a qualified
professional with knowledge of mechanics and electricity.
•
Carry out the installation with a second person to ensure a safe installation.
•
Tighten the screws, but do not over-tighten them. Tightening too tightly can
damage the screen and affect its stability.
•
This product is intended for indoor use.
•
Suspended loads should be checked at least twice a year to verify their
strength and load capacity.
•
Use the product and all its accessories only for the purpose for which they are
intended.
•
Children should not use the screen unsupervised or play under it.
Please read the following instructions carefully and keep them in a safe place for
future reference. The manufacturer assumes no responsibility for damage to
property or personal injury if the display is used outside of the recommended
specifications or if it is improperly installed.
Do not use this display near heating or air conditioning appliances. Do not install
the product in direct sunlight or in front of a window. The temperature sensitive
PVC surface may cause permanent damage to the projection screen surface. We
recommend that you wait approximately 2 hours after delivery before installing the
projection screen. This will allow the screen to acclimate, especially if it is moved
from a cold environment to a warm environment. Please avoid any stains on the
canvas surface. It may not be possible to make them disappear. The positions of the
stop points are set at the factory and can be changed. Especially with tensioned
screens, always use the entire length of the fabric to ensure the best possible
flatness. The adjustment of a few centimeters of the limit switches should only be
carried out by persons with specialist knowledge and in consultation with the
manufacturer. Incorrect adjustment may damage the projection screen.
Safety instructions
Summary of Contents for 049-3W Series
