Sirius Capacitor Module
–
User Manual
Model Number - 3550-48-B-1.7C-M-SD-A-L-19G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
13
Step 2:
After this message appears, hold fault reset button for 5 seconds, then the LCD will display the
following message which means that the cell balancing has been enabled.
Step 3:
To disable cell balancing, when current is zero, the LCD will display the following message.
Step 4:
After this message appears, hold the fault reset button for 5 seconds, then when the LCD
displays the following message, it means that balancing has been disabled.
Step 5:
To make the current zero, follow the steps below:
→
When current is not zero, the LCD will display the following message.
→
To make the current zero, hold the fault reset button for 3 seconds and the LCD will display the
following message.
Note!
To enable and disable balancing, the Current should always be zero.
Note!
Balancing is automatically disabled if there is a Current reading
greater than zero.
