Sirius Capacitor Module
–
User Manual
Model Number -7100-48-B-2C-M-SD-A-FL
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
11
This means that cell balancing has been enabled.
Step 3:
To disable cell balancing, when current is zero, the LCD will display the following message :
Step 4:
After this message appears, hold the fault reset button for 5 seconds, then when the LCD displays
the following message, it means that cell balancing has been disabled.
Step 5:
To make the current zero, follow the steps below:
•
When the current is not zero, the LCD will display the following message.
•
To make the current zero, hold the fault reset button for 3 seconds and the LCD will display
the following message.
This means that the current is now zero.
To return back to the normal screen, press the fault reset button once more or leave the module
idle for 5 seconds.
Note!
Balancing is automatically disabled if there is a current reading greater
than zero.
Note!
To enable and disable balancing, the current should always be zero.
