Sirius Capacitor Module
–
User Manual
Model Number -7100-48-B-2C-M-SD-A-FL
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
10
2.
Fault Reset
Fault Reset is a push button which is used to turn ON the protected terminal manually after it
turns OFF due to any error.
The additional features of Fault Reset are as follows:
a)
Hold Fault Reset for 5 seconds to toggle the protected terminal.
b)
Hold
Fault Reset
for 3 seconds to reset fault if there is/are any.
c)
We can set the current reading to zero.
d)
Press Fault Reset button to check the State of Charge and Instantaneous Power.
e)
Press the Fault Reset button to see the individual cell voltages.
•
Checking for individual Cell Voltage
When the fault reset button is pressed, the LCD after displaying the state of charge and
instantaneous power, will display the cell voltages of the first four cells as shown below:
01=Voltage of 1st Cell
02=Voltage of 2nd Cell
03=Voltage of 3rd Cell
04=Voltage of 4th Cell
By continuously pressing, the cell voltages will be displayed for all the cells.
•
Enabling/Disabling Cell balancing
After scrolling through the individual cell voltages, cell balancing can be enabled / disabled by
following the steps below:
Step 1:
When the current is zero, the LCD will display the following message :
Step 2:
After this message appears, hold the fault reset button for 5 seconds, then the LCD will
display the following message:
