Sirius Capacitor Module
–
User Manual
Model Number -7100-48-B-2C-TM-SD-A-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
16
4.
Operation Procedures:
4.1 Module Configuration:
Follow the steps below to switch ON the Module.
Step 1: Connecting the Load:
Connect the F12 terminals of the Module to the load. F12 terminals are shown in picture below:
Step 2: Module Start-Up:
1.
Turn
ON
the Circuit breaker by pushing the Blue buttons upwards as shown in the picture below:
2.
The picture below shows that the Module is turned
ON
.
