This manual
is f
or
use b
y qualified personnel
onl
y
There are access ports on the bottom left, bottom right, and on the bottom of the wiring access
panel.
One large and two small strain reliefs are included in the HAB™ packaging. To use them remove
the plugs from the relevant access ports and replace them with the included strain reliefs. The
large strain relief will accept up to 2/0 wire.
4.6. Connecting the HAB™ to Your Inverter
NOTE
Note:
When making the connections, be sure to observe correct hard-
ware stacking and proper polarity, and ensure that nothing obstructs the
connection between the terminal surface and the battery cable lug,
Rev: 5.0
2022
23
HAB Inst/UserManual REV5.0.indd 23
HAB Inst/UserManual REV5.0.indd 23
10/10/22 3:46 PM
10/10/22 3:46 PM
