This manual
is f
or
use b
y qualified personnel
onl
y
If there are no alarms, the green
RUN
LED will be lit, and the control panel will be populated
with information about the running condition of your HAB™. The control panel will remain lit for 1
minutes and then go blank. If you briefly (less than three seconds) press the HAB™ unit’s power
button, the control panel will again light for 1 minutes.
If there is an alarm condition, the
RED
Alarm LED will light, plus one or more of the alarm or pro-
tection state indicators at the right of the control panel will light. Please see the BMS Alarm and
Protection table for details.
To turn off the HAB™, press the power button for three seconds. The run LED will flash five times,
then the control panel and the state of charge bar will go dark. The HAB™ is now off.
Rev: 5.0
2022
37
HAB Inst/UserManual REV5.0.indd 37
HAB Inst/UserManual REV5.0.indd 37
10/10/22 3:46 PM
10/10/22 3:46 PM
