12
※LED light flash in simulate-learning.( means under simulate- learning condition), push P key to record value after simulate -learning. )
※As no use of screwdrivers: UP and push P key can set up waiting time.
If three seconds are set, but no starting signal after set time, it will buzz.
※Push R key to restore to factory settings.
General execution of pre-set program:
Start
LL=1.5
Lt=1.00
＊
If stop is among dots, it
is normal fastening. “OK”will be shown.
＊
If stop is before Lt or ove
r Ht, it is “N.G.”.
＊
User can freely adjust Lt. However, if Ht and Lt is closer, it will
request more accuracy.
Ht=5.0
OK
N.G
N.G
