21
Highest analog
output
corresponding
display setting
value
(AnHi)
Setting example:
1. When the need the basic unit to display 100 and the output
is 20mA, modify it to 100 here. Modifiable range: -199999 ~
999999.
2. Press
to enter parameter modification, press
or
to
modify the value.
3. Press ENT to save the modified parameters and enter the
next parameter setting page.
2.5
Description of Abnormal Display Screen
** When a specific specification (RTD, load cell or potentiometer) is not connected, the following situations will
occur
Display Screen
Screen Description
The input signal is 120% higher than the rated input value.
The input signal is -10% lower than the rated input value.
The input signal is 180% higher than the rated value or the internal circuit is damaged.
The displayed value is now higher than the display overflow set-point DoFLv. (MAX 999999)
The displayed value is now lower than the minimum display range (-199999).
While reading/writing EEPROM, error occurs due to external interference or over-times (about
100,000 times).
**
If E-00 occurs, first, select NO and press ENT to save. If E-00 occurs again, contact the manufacturer personnel.
2.6
Alarm Action Output Timing Diagram
Depends on DEL or SDT
Summary of Contents for KTM-IWT400
Page 6: ...5 配線圖 2 1操作流程及顯示 ...
Page 30: ......
