16
PICKING UP SCREW
Make sure the bit type on your electric screwdriver matches the head of the screw, and
the bit is magnetized before use. (Bit that not magnetized will not stick with the screw
and screw will fall off after picking up).
Hold the screwdriver and put the driver bit above the bit guide and push it straight
down to “+” on top of the screw as figure below.
※
NOTE THE FOLLOWING WHEN MAKING ABOVE ADJUSTMENT
※
a.
Do not push the driver bit with too much force when picking up the screw, or it will
damage the rail assembly.
b.
Do not deliberately apply for on the circled plate or it will damage the machine.
