6
4. Insert the tooling plate in the rear end of rail according to Table b, fasten the screw
of step 1.
※
COMBINATION OF THE THICKNESS FOR REFERENCE
※
Table b
Dia. of Screw Bolt (d) mm
Accessory-Tooling Plate (Rear) mm
0.8
1.0mm
1.0
1.2mm
1.2
1.4mm
1.4
1.6mm
1.6
1.8mm
2.0
2.2mm
5. After width adjustment of the rail assembly, place a screw into the groove and slide
it up and down to both sides, to check whether the movement is smoothly.
※
NOTE THE FOLLOWING WHEN MAKING ABOVE ADJUSTMENT
※
a.
Please must keep the width of rail from the beginning to the end uniformly.
b.
When adjusting the width of front rail assembly, the screw of step 2 must be
fastened.
