manualshive.com logo in svg

Kikusui TOS5300, Communication Interface Manual, Page: 41 / 77

Share
Download
Kikusui TOS5300 Communication Interface Manual Download Page 41

TOS5300_INTERFACE

41

Querying Measured Values (SEQuence1:ACQuire)

3

Co

m

m

a

n

d

 R

e

fe

re

n

ce

RES

Queries the results of the previous test.

Command

RESult[:IMMediate]?

Response

Returns the following results of the previous test: test number, program number, test mode, test 
start time, voltage, current, resistance, test time, and judgment result. Each result is separated by a 
comma in the following format: <NR1>, <NR1>,<character>, <NR1>, <NR3>, <NR3>, <NR3>, 
<NR3>, <character>.

Response format <NR1>Test number

A counter that is incremented each time a test is executed. After 4294967295, the
count returns to 0.

<NR1>Program number

For a single test, 1 is always returned. For an auto test, 1 is returned for the first test,
and 2 is returned for the next test.

(Example) ACW and then IR

If you send a RES? query after the ACW test, 1 is returned. If you send the query after
the IR test, 2 is returned.

<Character>Test mode {ACW|DCW|IR}

ACW: AC withstanding voltage test

DCW: DC withstanding voltage test

IR: Insulation resistance test

<NR1>Test start time  yyyy, mm, dd, hh, mm, ss (year, month, day, hour, minute, second)

<NR3>Voltage

Measured voltage

<NR3>Current

Measured current

If the test result is fail, the judgment criterion is returned.

<NR3>Resistance

Measured resistance

If the test result is fail, the judgment criterion is returned.

<NR3>Test time

The test time is returned.

<Character>Judgment result {PASS|U-FAIL|L-FAIL|PROT|ABORT}

PASS: The test was successful.

U-FAIL: A value exceeding the upper limit was detected.

L-FAIL: A value less than the lower limit was detected.

PROT: A protection function was activated, and the test was stopped.

ABORT: Test was aborted.

Summary of Contents for TOS5300














































































Reviews:

No comments