TOS5300_INTERFACE
25
3
Co
m
m
a
n
d
R
e
fe
re
n
ce
DC Withstanding Voltage Test (DCW) Conditions
These are commands for setting the DC withstanding voltage test conditions.
Test voltage setting (DCW)
SOUR:DCW:VOLT
Sets the test voltage.
Command
SOURce:DCW:VOLTage[:LEVel] {<numeric>|MIN|MAX}
SOURce:DCW:VOLTage[:LEVel]? {MIN|MAX}
Parameter
Value:
0 to 6.2 k (The default value is 0.)
Unit:
V
Response
Returns the test voltage setting in <NR3> format.
Limit voltage setting (DCW)
SOUR:DCW:VOLT:PROT
Sets the limit voltage.
Command
SOURce:DCW:VOLTage:PROTection[:LEVel][:UPPer]
{<numeric>|MIN|MAX}
SOURce:DCW:VOLTage:PROTection[:LEVel][:UPPer]? {MIN|MAX}
Parameter
Value:
0 to 6.2 k (The default value is 6.2 k.)
Unit:
V
Response
Returns the limit voltage in <NR3> format.
5301
* RCL
* RST
* RCL
* RST