26
TOS5300_INTERFACE
DC Withstanding Voltage Test (DCW) Conditions
Upper limit setting (DCW)
SENS:DCW:JUDG
Sets the upper limit that is used in judgments (UPPER).
Command
SENSe:DCW:JUDGment[:UPPer] {<numeric>|MIN|MAX}
SENSe:DCW:JUDGment[:UPPer]? {MIN|MAX}
Parameter
Value:
0.01 m to 11 m (The default value is 0.02 m.)
Unit:
A
Response
Returns the upper limit in <NR3> format.
Lower limit setting (DCW)
SENS:DCW:JUDG:LOW
Sets the lower limit that is used in judgments (LOWER).
This setting is enabled when SENS:DCW:JUDG:LOW:STAT is set to ON.
Command
SENSe:DCW:JUDGment:LOWer {<numeric>|MIN|MAX}
SENSe:DCW:JUDGment:LOWer? {MIN|MAX}
Parameter
Value:
0.01 m to 11 m (The default value is 0.01 m.)
Unit:
A
Response
Returns the lower limit in <NR3> format.
SENS:DCW:JUDG:LOW:STAT
Sets whether the lower limit is used in judgments (LOWER ON/OFF). Use SENS:DCW:JUDG:LOW to
set the lower limit.
Command
SENSe:DCW:JUDGment:LOWer:STATe {ON|OFF|1|0}
SENSe:DCW:JUDGment:LOWer:STATe?
Parameter
Value:
ON (1)
The limit is used in judgments.
OFF (0)
The limit is not used in judgments (default).
Response
Returns whether the lower limit is used in judgments in <NR1> format.
* RCL
* RST
* RCL
* RST
* RCL
* RST