PWR Series Setup Guide
9
Connecting the Power Cord (Cont.)
1600 W type
Procedure to connect the power cord
Cable clamp
N
L
(
GND
)
AC INPUT terminal block
N
: White or blue
L
: Black or brown
Fastening plate
Fastening plate
(
GND
): Green or green/yellow
Fix the covered part of the power
cord with the fastening plate.
1
Check that the AC power line complies with the input
rating of the PWR.
The voltage that can be applied is any of the nominal power
supply voltages in the range of 100 VAC to 240 VAC. The
frequency is 50 Hz or 60 Hz.
2
Check that the POWER switch is turned off.
3
Connect the power cord provided to the AC INPUT
terminal block on the rear panel as shown in figure
4
Attach crimping terminals at the switchboard end of
the power cord.
5
Turn the switchboard breaker off.
6
Connect the power cord to match the L, N, and
GND) of the switchboard.
