Kikusui PFX2000 Series, Operation Manual, Page: 29 / 104

PFX2000 Setup 1-13
Fig. 1-4 Installing the Charge/Discharge Power Supply Unit
(PFX2011 Example)
1.
2.
5. 7.
3.
4.
*
Push the top section of the louver
(indicated with an arrow) to lift the
bottom section.
a
Remove the louver by holding
the lifted section and pulling in
the direction of the arrow.
b
When the unit is inserted
a third of the way in, the
unit is locked once.
Lever
Push the lever until the panel surface
of the unit is flat with the rack mount
bracket surface. Fix the unit to the frame using the
screws that came with the package.