manualshive.com logo in svg

KIESELMANN 6125, Operating Instruction, Page: 18 / 32

Share
Download
KIESELMANN 6125 Operating Instruction Download Page 18

Operating instruction | KIESELMANN GmbH

8 | Disassembly and assembly

18 / 32

6125_APNV_EN

8.2 Assemble - sampling valve

• Before installation, thoroughly clean and slightly lubricate mounting areas and running sur-

faces.

• Lightly grease and mounting the O-rings.

 CAUTION

Ø

Thread connection (G1) from bellow (F1) and shaft (F4) is secured with a screw retention. After
unscrewing the bellows (F1) it must always be replaced.

–

Remove all adhesive residue on the threaded connection (G1) and degrease thoroughly.
During assembly secure the new bellows again with a Screw retention detachable (e.g.
Loctite 243).

Insert spring module (FA)

At first open the valve manually. See fig. A, gap (SP) = 1mm.

Fig. A

• Place a nut (M) and a washer (U) on the shaft (F4).

• Screw a nut (S) in the shaft till metallic stop by hand.

• Then turn further with a flat wrench to the limit stop (approx. 3 turns). Insert the spring module

(FA) into the housing (IG).

Fig. B

• Mount clamp coupling (F11) and tighten the screw connections (F12) / (F13) evenly.

• Unscrew nut (M6) again. Remove disc (A6.4) and nut (12).

• Check the valve function.

Fig. A

Fig. B

Summary of Contents for 6125

































Reviews:

No comments