Kieback & Peter MD10-FTL-HE, Quick Start Manual

Page: 34 / 44

en:key
|
Operation
34
/44
Displaying the radio ID
You want to see the radio ID of the valve controller.
► 1
Activate the service level and select the “ID, code” function.
The figures show the last 4 digits of the radio ID (e.g.: 934F).
Code “1” to “4” shows the number of the valve controller.
2
Briefly press the registration button.
The next radio ID or the “rEs” function appears.
Switching the room sensor off
You want to switch off the room sensor.
► 1
Activate the service level and select the “rEs” function.
2
Press and hold the registration button for 5 seconds.
The “dEL” and “rEs” functions appear and the display goes blank.
The room sensor is switched off, reset to the default settings and all registered valve
controllers are logged off.
Displaying the software version of the room sensor
You want to see the software version of the room sensor.
► 1
Activate the service level and select the “Version, code” function.
The software version of processor 1 is displayed (code “1”).
2
Briefly press the registration button.
The software version of processor 2 is displayed (code “2”).
After de-registering the valve controllers, the room sensor switches off after
15 minutes if no other valve controller is registered.