en:key
|
Commissioning
16
/44
The en:key room set is now in operation, and controls the room temperature in accordance
with the current heating time profile (default/learned).
»
Mounting the room sensor
01 02
04
03
05
If the valve controller acknowledges the registration with a series of tones or
if “Code
Δ
2” appears on the display, the registration was not successful, and
must be repeated.
Up to 10 minutes may elapse before the first data exchange. If the room sen-
sor switches off after 15 minutes, registration was not successful and must
be repeated.
Caution
Flush mounted cabling and piping at the installation location
(electricity, gas, water).
Cabling and piping can be damaged by drilling.
►
Check the installation location for flush mounted piping and
cabling, or contact a specialist.
Summary of Contents for MD10-FTL-HE
